Gsm Module And Sim Installation (Detail "L" In Figure 3.1) - DSC WP8033 Installer's Manual

3.5 GSM Module and SIM Installation
Plug in the GSM module and fasten it as shown in the above
drawing making sure that the two leading slots on both sides of
the GSM module slide along the two leading ribs on the front
unit.
A. GSM module
B. Leading ribs
C. Leading slot (1 of 2)
D. Front unit
Caution! Do not install or remove the GSM module when the
system is powered by AC power or backup battery.
Figure
10
3.5 – Optional GSM Module Mounting and SIM Card Insertion
(detail "L" in Figure 3.1)
Insert the SIM card into the GSM module as shown in
the above drawing.
1. Slide top cover.
2. Open cover
3. Align SIM card in cover (note cover orientation)
4. Slide SIM card into cover
5. Rotate cover to close
6. Lock cover to close
IMPORTANT! Do not insert or remove SIM card when
the control panel is powered by AC power or battery.
D-306048
WP8033 Installer's Guide