Connecting Wired Zone And Siren (Detail "B" In Figure 3.1) - DSC WP8033 Installer's Manual

3.4 Connecting Wired Zone and Siren
If an expander module is not used, one wired zone and one low voltage siren can be connected directly to the front
panel PCB.
A. GND
B. Wired Zone
C. Siren
D. For future use
E. Site external siren MG electronics
MG441PDS or equivalent 6-12VDC,
150 mA Max
F. Magnetic contact or any other contact
(not a detector)
G. Alarm N.C.
*
Wired zones can be enrolled in any zone in the WP8033- G2 control panel from 01 to 64
D-306048
WP8033 Installer's Guide
(detail "B" in Figure 3.1)
*
WIRED ZONE &SIREN WIRING
Figure 3.4 – Wired Zone and Siren Wiring
9