Care And Cleaning - Sunbeam FP8610 Instruction Booklet

Care and cleaning

Control probe
If cleaning is necessary, wipe over with a
damp cloth.
Note: The control probe must be removed
before the frypan is cleaned and the control
probe inlet must be dried before the frypan is
used again.
NEVER IMMERSE THE CONTROL PROBE IN
WATER OR OTHER LIQUID.
Store the control probe carefully. Do not
knock or drop it as this can damage the
probe. If damage is suspected, return the
control probe to your nearest Sunbeam
appointed service centre for inspection.
Refer to the separate warranty and service
centre booklet.
12
Glass lid
Wash the lid in warm soapy water using a
soft sponge, rinse and dry thoroughly. The
glass lid is dishwasher safe.
Note: Take care when glass lid is hot. Do not
place hot lid under water or on cold surfaces.
This may cause lid to crack.