Care, Cleaning & Storage; Kneading Blade - Breville LBM200 Instruction Book

Care, Cleaning
& Storage
CLEANING THE STAINLESS
STEEL HOUSING
• Wipe the exterior of the stainless steel
housing and the display screen with a soft,
damp cloth. A non-abrasive liquid cleanser
or mild spray solution may be used to avoid
build-up of stains. Apply the cleanser to
the sponge, not the outer surface or display
screen, before cleaning. Do not use an
abrasive cleanser or metal scouring pad to
clean any part of the bread maker as these
will scratch the surface.
WARNING
Never immerse the stainless steel housing in
water or place any part of the bread maker in
the dishwasher. Take care not to allow water
or cleaning fluids to seep under the buttons or
the display screen on the control panel when
wiping clean.
1. Ensure the bread maker is turned OFF
by pressing and holding the START /
CANCEL button. Remove the power
plug from the power outlet. Allow the
bread maker and all accessories to cool
completely before disassembling and
cleaning.
2. If over-spills such as flour, nuts, raisins
etc. occur in the interior baking chamber,
carefully remove them using a soft, damp
cloth. Use extreme caution when cleaning
the heating elements inside the baking
chamber. Ensure the bread maker is
completely cool then gently wipe with a
soft, damp sponge or cloth along the length
of the heating element. Do not use any type
of cleanser or cleaning agent.
16
CLEANING THE LID
1. The lid can be detached for easier cleaning.
Open the lid and align the notches on the
lid with the grooves in the bread maker,
then pull outward to detach.
2. Use a soft, damp sponge or cloth to clean
the lid and dry thoroughly.
3. Reattach the lid to the bread maker
before use.
CLEANING THE FRUIT
& NUT DISPENSER
1. The fruit and nut dispenser can be removed
from the lid for cleaning.
2. Close the base from inside the lid and pull
the fruit and nut dispenser upwards and
away from the lid.
3. Wash in warm soapy water and dry
thoroughly prior to using.
NOTE
Never wash the fruit and nut dispenser in
the dishwasher.
CLEANING THE BREAD PAN
& KNEADING BLADE
The inside of the bread pan is coated with
a high quality non-stick coating. As with any
non-stick coated surface, do not use abrasive
cleansers, metal scouring pads or metal
utensils to clean these items as they may
damage the finish. Never wash the bread pan
in the dishwasher.
1. Ensure the bread maker is turned OFF by
pressing and holding the START/CANCEL
button. Remove the power plug from the
power outlet. Allow the bread maker and
all accessories to cool completely before
disassembling and cleaning.