IBM 9006-22C Installing And Configuring page 126

• MR_SAS_Unified_StorCLI_7.6-007.0606.0000.0000-SCGCQ01639776\ \(1\).zip
4. Type the following command.
cd versionChangeSet/univ_viva_cli_rel/
5. Unzip the Unified_storcli_all_os.zip file.
6. Type the following command.
cd Unified_storcli_all_os/Linux-PPC/LittleEndian
7. Unzip the storcli64.zip file.
8. The storcli64 file can now be invoked by specifying the current directory: ./storcli64 -h
For details on managing RAID arrays, see Chapter 6 in the MegaRAID SAS Software User Guide (https://
docs.broadcom.com/docs/DB15-001199-02).
Helpful StorCLI commands
To upgrade the StorCLI RPM, run:
rpm -Uvh <StorCLI-x.xx-x.noarch.rpm>
To show a summary of the drive and controller status:
storcli show
To show a list of all controllers and drives that need attention:
storcli show all
To show information about the drives:
storcli /cx[/eall]/sall show
To locate a physical disk by turning on the identify LED:
storcli /cx[/ex]/sx start locate
To turn off the identify LED:
storcli /cx[/ex]/sx stop locate
To prepare a drive for removal:
storcli /cx[/ex]/sx spindown
To view the adapter settings:
storcli64 /c0 show personality
To change the adapter settings:
storcli64 /c0 set personality=JBOD|RAID
To change the settings of the adapter to support the self-encrypting drive (SED) function:
storcli64 /c0 set personality behavior securesed=off/on
To check the firmware level of the MegaRAID adapter:
storcli64 /c0 show all|egrep
112 Power Systems: Installing and configuring the IBM Power System LC922 (9006-22P)
"Bios Version|Firmware Package|Firmware Version"