See "Drive installation options for the 9006-22P system" on page 9 for cabling information.
f) Insert the PCIe adapter (A) in position 1 of the PCIe adapter riser (B) as shown in Figure 54 on page
91.
Figure 54. Inserting an adapter into position 1 of the PCIe riser
g) Replace the screw to secure the tail-stock.
h) Insert the PCIe adapter (A) that is located in position 2 into the PCIe adapter riser (B) as shown in
Figure 55 on page 91.
Figure 55. Inserting an adapter into position 2 of the PCIe riser
i) Replace the screw to secure the tail-stock.
j) Insert the PCIe riser into the chassis as shown in Figure 56 on page 92.
1) Retract the retaining pin (B) so the arrow points to the system.
Installing and configuring your system and system features 91