Siemens RUGGEDCOM MX5000RE Installation Manual page 51

RUGGEDCOM MX5000RE
Installation Guide
Figure 32: Installing a Power Supply Module
1. Screws 2. Power Supply 3. Chassis
3. Hand-tighten the screws to secure the power module to the chassis.
4. Turn on power to the device and confirm the module is receiving and supplying power. This is indicated by
the LEDs on the module.
LED
O
I
Installing/Removing Power Supply Modules
3
2
1
State
Green The module is supplying power
Green The module is receiving power
Description
Chapter 4
Modules
41