Installing/Removing Power Supply Modules - Siemens RUGGEDCOM MX5000RE Installation Manual

RUGGEDCOM MX5000RE
Installation Guide
Figure 29: Installing a Module
1. Chassis 2. Module 3. Screw
5. Tighten the screws to secure the module.
6. [Optional] If necessary, install the device in the rack.
7. For control and switch modules only, connect power to the device.
Section 4.3

Installing/Removing Power Supply Modules

The RUGGEDCOM MX5000 supports dual redundant power supplies that can be installed in any combination.
Figure 30: Power Supply Modules
1. Power Supply Module (PS1) 2. Power Supply Module (PS2)
Installing/Removing Power Supply Modules
1
2
3
1
Chapter 4
Modules
2
39