Minimum Features; System Cooling - IBM Power Systems S822LC Technical Overview And Introduction

Two POWER8 processor modules:
– 8-core 3.3259 GHz processor module
– 10-core 2.860 GHz processor module
Up to 1024 GB of 1333 MHz DDR4 ECC memory
Two SFF bays for two HDDs or two SSDs that supports:
– Two 1 TB 7200 RPM NL SATA disk drives (#ELD0)
– Two 2 TB 7200 RPM NL SATA disk drives (#ES6A)
– Two 480 GB SATA SSDs (#ELS5)
– Two 960 GB SATA SSDs (#ELS6)
– Two 1.92 TB SATA SSDs (#ELSZ)
– Two 3.84 TB SATA SSDs (#ELU0)
Integrated SATA controller
Three PCIe Gen 3 slots:
– One PCIe x8 Gen3 Low Profile slot, CAPI enabled
– Two PCIe x16 Gen3 Low Profile slot, CAPI enabled
Four SXM2 form factor connectors for NVIDIA Tesla P100 GPU (#EC4C, #EC4D, or
#EC4F) only
Integrated features:
– EnergyScale™ technology
– Hot-swap and redundant cooling
– One front USB 2.0 port for general usage
– One rear USB 3.0 port for general usage
– One system port with RJ45 connector
Two power supplies

1.1.1 Minimum features

The minimum Power S822LC model 8355-GTB server initial order must include:
Two processor modules with at least 16 CPUs
128 GB of memory (eight 16 GB memory DIMMs)
Two #EC4C Compute Intensive Accelerator - NVIDIA GP100
Two power supplies and power cords
An OS indicator
A rack integration indicator
A Language Group Specify
Linux is the supported OS. The Integrated 1Gb Ethernet port can be used as the base LAN
port.

1.1.2 System cooling

Air or water cooling depends on the GPU that is installed. See 1.13.3, "Compute Intensive
Accelerator" on page 26 for a list of GPUs available.
Feature code #ER2D is the water cooling indicator for the 8335-GTB.
Note: If #ER2D is ordered, you must order #EJTX fixed rail kit. Ordering #ER2D with
#EJTY slide rails is not supported.
Chapter 1. Architecture and technical description
3