Minimum Required Processor Card Features - IBM Power 595 Technical Overview And Introduction

Quantity
1
2
1
1
If IBM i is specified as the primary operating system, refer to Table 1-12, which lists the
minimum required features.
Table 1-12 Minimum required features when IBM i is the primary operating system
Quantity
1
1
1
or 1
1
1
1
—
1
2
2
2
1
or 1
1
1

1.3.1 Minimum required processor card features

The minimum configuration requirement for the Power 595 server is one 4.2 GHz 8-core
processor book and three processor core activations, or two 5.0 GHz 8-core processor books
and six processor core activations. For a description of available processor features and their
associated feature codes, refer to 2.6, "Processor books" on page 70.
Component description
RIO-2 I/O drawer located at location U5 in the system
rack prior to the availability of #5798
RIO-2 I/O bus cables, 2.5 m
Remote I/O Cable, 0.6 m
UPIC Cable Group, BPD1 to I/O Drawer at position
U5 in the system rack
Component description
Primary operating system indicator for IBM i
System console specify
SAN Load Source Specify: Requires Fibre Channel
Adapter
Internal Load Source Specify: Requires disk
controller and minimum of two disk drives
PCI-X 2.0 SAS Adapter for attachment of a DVD drive
PCI 2-Line WAN Adapter with Modem
RIO-attached PCI Expansion Drawer (prior to feature
5798 availability)
Rack space in a Dual I/O Unit Enclosure
RIO-2 Bus Adapter
RIO-2 I/O Bus Cables, 8 m
Power cords
Power Control Cable, 6 m SPCN
Media Drawer, 19-inch (prior to feature 5798/5720
availability).
One DVD drive
Power cords
SAS cable for attachment to #5912 SAS adapter
595 Media Drawer, 24-inch with #5798 availability
19-inch rack to hold the #5790 and 7214-1U2
PDU for power in 19-inch rack
Feature code
#5791
#3168
#7924
#6942
Feature code
#2145
—
For example, #5749
For example, #5782, two #4327
#5912
#6833
#5790
#7307, #7311
#6438
#3170
#6459
#6008
#7214-1U2
#5756
For example, #6671
For example, #3684
#5720
—
For example, #7188
Chapter 1. General description
11