Cleaning Notes; Fuse; Regular Maintenance Tasks; Ordering Information - Bosch Rexroth IndraControl VR 21 Series Operating Instructions Manual

VR 21

14.3 Cleaning Notes

NOTICE
Do not use any solvents (e. g. diluents)!
●
No high pressure cleaning devices are to be used!
●
To remove dirt from the front panel, only use a moist cloth
●

14.4 Fuse

The semiconductor fuse is not intended for replacement!
Use a semiconductor fuse to protect the device. After the fuse has
triggered, disconnect the device from the supply voltage so that the
semiconductor fuse can regenerate. The regeneration takes approxi-
mately 20 seconds at an ambient temperature of 20 °C. The higher
the ambient temperature, the longer the regeneration phase.

14.5 Regular Maintenance Tasks

At least once a year, all plug and terminal connections of the components are
●
to be checked regarding proper tightness and possible damage
Make sure that cables are not broken or crimped
●
Replace damaged parts immediately.
●

15 Ordering Information

15.1 Accessories and Spare Parts

For ordering information about accessories and spare parts, please refer to
chapter 5 "Spare Parts, Accessories and Wear Parts" on page
DOK-SUPPL*-VR21**.01**-IT02-EN-P
The surface of the foil as well as the display
seal are dissolved by solvents!
Bosch Rexroth AG
Ordering Information
5.
21/29