HP ProCurve 5300xl Series Management Manual page 629

Figure 13-24. Result of Using the Show Stack All Command To List Discovered Switches in the IP Subnet
Figure 13-25. Example of the Show Stack View Command To List the Stack Assigned to the
Viewing the Status of all Stack-Enabled Switches Discovered in the IP
Subnet. The next example lists all the stack-configured switches discovered
in the IP subnet. Because the switch on which the show stack all command
was executed is a candidate, it is included in the "Others" category.
Syntax:
show stack all
Viewing the Status of the Commander and Current Members of the
Commander's Stack. The next example lists all switches in the stack of the
selected switch.
Syntax:
show stack view
Selected Commander
Stack Management for the Series 3400cl and 6400cl Switches
Configuring Stack Management
13-31