Replace A Fan Module - Dell Force10 S55 Manual

Figure 6-1. Replacing the fan module
PSU0
To install a new fan module, follow the steps below:
Step Task
Take the fan module out of the shipping box.
1
Using the grab handle, slide the module in to the bay.
2
Tighten the securing screw at the top of the module.
3

Replace a fan module

To replace a fan module, follow the steps below.
Step Task
Loosen the securing screw at the top of the unit.
1
CAUTION:
Use the grab handle to slide the module out of the bay.
2
Using the grab handle on the replacement module, slide it into the bay.
3
Tighten the captive screws on the module with a screwdriver. Ensure that the module is secure.
4
32 | Fans
Optional
Module
Steps 2-3 must be completed in within 1 minute, or the chassis will power down.
Grab Handle
PSU1