Replace A Fan Module - Dell Force10 Z9000 Manual

Replace a Fan Module

To replace a fan module, follow these steps:
Step Task
Twist the latching screws so that the fan screen detaches from the system.
1
PSU0
PSU1
Remove the fan screen and set it aside.
2
Loosen the securing screw on the side of the module.
3
CAUTION:
Use the grab handle on the module to slide it out of the bay.
4
Use the grab handle on the replacement module to slide it into the bay.
5
Tighten the captive screw on the module with a screwdriver. Ensure that the module is secure.
6
Replace the fan screen.
7
Twist the latches to the fan screen until it is securely attached to the system.
8
Fan Module 0
Fan Module 1
You must complete steps 4 and 5 within one minute or the system will power down.
Fan Module 2
Fan Module 3
Grab Handle
Screw
Fans | 33