Storing Components - Dell Force10 S55 Manual

The system is powered-up as soon as the power cord is connected between the system and the power
source.
CAUTION: Always disconnect the power cable, before the power supply slots are serviced.
CAUTION: The power supply cord is used as the main disconnect device on the AC and the DC system;
ensure that the socket-outlet is located/installed near the equipment and is easily accessible.

Storing components

If you do not install your system and components immediately, Dell Force10 recommends that you
properly store the S55 and all optional components until you are ready to install them.
WARNING: Electrostatic discharge (ESD) damage can occur when components are mishandled. Always
wear an ESD-preventive wrist or heel ground strap when handling the S55 and its accessories. After you
remove the original packaging, place the S55 and its components on an antistatic surface.
Follow these storage guidelines:
• Storage temperature should remain constant ranging from -4° to 158° F (-20°C to 70° C).
• Store on a dry surface or floor, away from direct sunlight, heat, and air conditioning ducts.
• Store in a dust-free environment.
Site Preparations | 15