Software No. Display
The software number of the Inverter for which constants are stored in
the Digital Operator is displayed.
Example: Displaying Software No. of Inverter for which Constants are
Stored in EEPROM in Operator
•
Enable the setting for
constants n01 to n79.
•
Execute Software No.
Display (Sno)* using
the Constant Copy
Function Selection
(n76).
* Displays the lower 3 digits of the software version.
Display List
Operator
Display
Explanation
•
Press DSPL to light [PRGM].
•
Press ENTER to display the
set value.
•
Change the set value to 4 by
pressing the
•
Press ENTER.
•
Change the constant No. to
n76 by pressing the
key.
•
Press ENTER to display the
set value.
•
Change the set value to Sno
by pressing the
•
Press ENTER.
•
Press DSPL or ENTER.
Description
Lit: Constant copy function selection
enabled.
Lit: READ selected.
Flashes: READ under execution.
Lit: Writing (COPY) selected.
Flashes: Writing (COPY) under execu-
tion.
Lit: VERIFY selected.
Flashes: VERIFY under execution.
Lit: Inverter capacity display selected.
Lit: Software No. display selected.
Lit: READ, COPY (writing), VERIFY
completed.
6. Programming Features
(May be a different constant No.)
(Lit)
(May be a different constant No.)
(Flashes)
or
key.
(Lit for one second.)
↓
or
or
key.
(Software version: VSP020011)
Operator Display
(The constant No. is displayed.)
(Lit)
(Lit)
(Lit)
(The constant No. is displayed.)
Corrective Action
-
-
-
-
-
-
-
91