Siemens SINUMERIK 840D Programming Manual page 58

1 1
General 12.97
11.02
1.8 Special functions for cycles
The following is displayed in the file overview:
Further notes
The cycle package name after the vocabulary word
PACKAGE can also be written as a string in " ", but then
it is language-specific.
Version entries in cycles
Just as with package lists, the entry after the vocabulary
word ";VERSION:" is classed as the version ID. The
version entry has to be in the first ten lines of the cycle,
the search does not go any further.
Example:
%_N_ZYKL1_SPF
;$PATH=/_N_CUS_DIR
;VERSION: 01.02.03 31.10.2002
;Comments
PROC ZYKL1(REAL PAR1)
...
n
© Siemens AG, 2002. All rights reserved
1-58
SINUMERIK 840D/840Di/810D Programming Guide Cycles (PGZ) – 11.02 Edition