3
Milling Cycles
3.16 Swiveling – CYCLE800 (SW 6.2 and higher)
A, B, C (rotations)
• Rotations (axial, projection angle)
• Rotation (solid angle)
X1, Y1, Z1 (zero point after rotation)
Correction tool (_TC_N_WZ)
• yes / non
Display can be deactivated via the CYCLE800 start-
up menu.
• Yes: When swiveling onto a machining plane, the
rotary axes can be corrected to prevent risk of
collision.
Preconditions:
1. TRAORI option is required.
2. The machine manufacturer has adapted user
cycle TOOLCARR.spf appropriately.
3-232
SINUMERIK 840D/840Di/810D Programming Guide Cycles (PGZ) – 11.02 Edition
3
12.97
11.02
© Siemens AG, 2002. All rights reserved