Siemens SINUMERIK 840D Programming Manual page 13

0
11.02
Warning notes
The following warning notes with graded degrees of
importance are used in this documentation.
Danger
Indicates an imminently hazardous situation which, if
not avoided, will result in death or serious injury or in
substantial property damage.
Warning
Indicates a potentially hazardous situation which, if
not avoided, could result in death or serious injury or
in substantial property damage.
Caution
Used with the safety alert symbol indicates a
potentially hazardous situation which, if not avoided,
may result in minor or moderate injury or in property
damage.
Caution
Used without safety alert symbol indicates a
potentially hazardous situation which, if not avoided,
may result in property damage.
Notice
Used without the safety alert symbol indicates a
potential situation which, if not avoided, may result in
an undesirable result or state.
ã Siemens AG, 2002. All rights reserved
SINUMERIK 840D/840Di/810D Programming Guide Cycles (PGZ) – 11.02 Edition
0
Preface
Proper use
0-13