C450Cbn-3C And C450Ccn-3C Control Modules With Relay Output - Johnson Controls Penn System 450 Series Technical Bulletin

Modular control systems with standard control modules
Hide thumbs Also See for Penn System 450 Series:
Table of Contents

Advertisement

C450CBN-3C and C450CCN-3C Control Modules with Relay Output

Product
Power Consumption
Supply Power
Ambient Operating Conditions
Ambient Shipping and Storage
Conditions
Input Signal
Output Relay Contacts
Analog Input Accuracy
Control Construction
Dimensions (H x W x D)
Weight
Compliance
System 450™ Series Modular Control Systems with Standard Control Modules Technical Bulletin
C450CBN-3C and C450CCN-3C: System 450 Control Module models are sensing
controls and operating controls with LCD, four-button touchpad, and SPDT relay output
C450CBN-3C: Control Module with one SPDT output relay
C450CCN-3C: Control Module with two SPDT output relays
C450CBN-3C: 0.9 VA maximum
C450CCN-3C: 1.3 VA maximum
Internal Supply Power: C450YNN-1C Power Supply Module
External Supply Power: 24 VAC (20–30 VAC) Safety Extra-Low Voltage (SELV)
(Europe), Class 2 (North America), 50/60 Hz, 10 VA minimum; or 22 to 30 VDC
Note: A System 450 control module or module assembly can use an internal or an
external supply power source, but must not be connected to both simultaneously.
Temperature: -40 to 66C (-40 to 150F)
Humidity: Up to 95% RH noncondensing; Maximum Dew Point 29C (85F)
Temperature: -40 to 80C (-40 to 176F)
Humidity: Up to 95% RH noncondensing; Maximum Dew Point 29C (85F)
0–5 VDC for humidity sensors and static pressure transducers
0.5–4.5 VDC for ratiometric pressure transducers
1,035 ohm at 25C (77F) for A99 PTC temperature sensors
1,000 ohm at 21.1C (70F) for TE-6xxx Nickel temperature sensors
General: 1/2 HP at 120/240 VAC, SPDT
Specific: AC Motor Ratings
AC Full-load Amperes:
Locked-Rotor Amperes:
_____________________________________
10 Amperes AC Non-inductive at 24/240 VAC
Pilot Duty: 125 VA at 24/240 VAC
Resolution: 14 bit
Independently mounted control, surface mounted with Lexan® 950 enclosure suitable for
DIN rail mounting or direct mounting to a hard, even surface.
127 x 61 x 61 mm (5 x 2-3/8 x 2-3/8 in.)
C450CBN-3C: 209 g (0.46 lb)
C450CCN-3C: 222 g (0.49 lb)
North America: cULus Listed; UL 60730, File E27734;
FCC Compliant to CFR47, Part 15, Subpart B, Class B;
Industry Canada (IC) Compliant to Canadian ICES-003, Class B limits
Europe: CE Mark – Johnson Controls, Inc. declares that this product is in compliance with
the essential requirements and other relevant provisions of the EMC Directive
and the Low Voltage Directive.
Australia: Mark: C-Tick Compliant (N1813)
120 VAC
208/240 VAC
9.8 A
4.9 A
58.8 A
29.4 A
69

Advertisement

Table of Contents
loading

Table of Contents