Johnson Controls Penn System 450 Series Technical Bulletin page 44

To access and navigate the System 450 Setup Start screens:
1. In the Main (Sensor Status) screen, press
for 5 seconds. The Sensor Setup Start (SENS) screen appears (Figure 18).
Press and hold
+ for 5 seconds
to access the
Setup Start screens.
M
M
M
Up to 10 outputs
can be connected,
set up, and viewed.
M
Figure 18: Accessing the Setup Start Screens in the System 450 UI
2. Press M (repeatedly) to scroll through and access the Output Setup Start
x
(OUTX ) screens for all of the outputs in your control system.
Note: All Setup Start screens have four blinking dashes in the setup value
fields. You cannot select values for the fields in the Setup Start screens.
3. Depending on the Setup Start screen that you have navigated to, press
• in the Sensor Setup Start (SENS) screen to go the Select Sensor 1 Type
(Sn-1) screen and set up the sensors in your control system. (See Setting
Up the Sensors and Transducers for procedures on setting up the
hard-wired sensors and transducers.)
44 System 450™ Series Modular Control Systems with Standard Control Modules Technical Bulletin
Main Screens
Press
and all of the Analog and Relay Output Setup Start screens.
232
Press
PSI 1
the Sensor Setup screens.
Sensor Status Press
Displayed
that output's set up screens.
Sensor Setup
Press
Start
return to the Main Screen.
- - -
Sensor Setup Screens
SENS
Relay Output
Setup Start
- - -
Output 1 Relay Setup Screens
OUTR 1
Output Relay 1
Relay Output
Setup Start
- - -
Output 2 Relay Setup Screens
OUTR
2
Output Relay 2
Analog Output
Setup Start
- - -
Output 3 Analog Setup Screens
OUTA 3
Analog Output 3
and simultaneously and hold
to scroll through the Sensor Setup Start screens
M
in the Sensor Setup Start screen to scroll through
in any Output Setup Start screen to scroll through
+ simultaneously in any Setup Start screen to
: