About This Document - Siemens Cerberus CS1140 Planning

About this document

i
Fire & Security Products
Siemens Building Technologies Group
Purpose
This document describes the project planning of the hardware modules of the control unit
CS1140. The consistent adherence to these instructions ia a prerequisite for a safe ap-
plication.
Scope
This document contains information on all CS1140 components for EP7F, including part
numbers for ordering.
Target group
This product documentation and the work instructions are aimed at the following persons,
who have a particular function and have the corresponding training and qualification.
Group of persons
Project Manager
Reference documents
Information in
e1260
e1393
e1971
e1273
e1274
e1275
e1669
e5377
e4665
e4598
e5590
e5113
e4594
e5109
e825
e1204
e1508
e1062
e1594
e4282
x1099
e6516
Work and operational safety
Before personnel begin work on the system, they must have read and understood the
related operating instructions, in particular Chapter 1 "Safety regulations".
Activity
The project manager is responsible
for the local project management.
He co–ordinates the schedules of
all groups of people working on a
project as well as resources. He
also continuously obtains the tech-
nical information required for pro-
ject realization.
document
Hardware description modules (CS1140 'Modular')
Installation H26../H28.. housing
Installation H37.. housing
Installation H38.. housing
Installation H47.. housing
Installation H67.. housing
Paging interface card K3I090, Technical manual
Compact control unit CI1145
Operating instructions AlgoPilot B3Q4..
Operating instructions AlgoPilot B3Q6..
Operating instructions extinguishing section B3Q4..
Operating instructions extinguishing section B3Q6..
Commissioning Hardware (CS1140 'Modular')
Commissioning Extinguishing
Key figures for collective detection lines
Fire detection in explosion-hazard areas
Guideline for connection factors, line resistances, etc.
Communication module, modem application
C–Bus, technical description
FlashTool Operation
Modules overview with part numbers
Inscription strip templates for indication & operation equipment
Qualification
He has had the technical training
appropriate to his function and the
size of a project or the product line
used in the project and has atten-
ded the training courses for project
managers at the supplier's works.
e4595e−0
05.2003
1