About This Document - Siemens AlgoRex CS1140 Comissioning Hardware

1

About this document

Group of persons
Commissioning personnel
Building Technologies
Fire Safety
Goal and purpose
This document describes commissioning of the hardware components of control
panel CS1140/45. Safe applications will result from consistently following these in-
structions.
Scope of validity
This document contains information valid for software variant EP7F.
Target audience
This product documentation and the operating instructions are intended for the fol-
lowing people, who carry out a particular job and have been trained for it.
Activity
They configure the product, device or system in
accordance with the customer's specification on
site.
Check the product operability and release the
product, system or device for use by the operator
/ customer. They are also responsible for trouble-
shooting.
Reference documents
Information in Document
257 Operating instructions for LE3
1062 Communications module, modem applications
1164 Detector exchanger and detector tester RE6/RE6T/RE10
1260 Description of hardware plug-in modules (CS1140 'Modular') all EPs
1276 / 007016 DLO11.. / FDL241-9 Techn. description, commissioning etc.
1393 Assembly instructions for housing series H26..../H28...
1462 Operating instructions for DZ1193
1669 PSA interface board K3I090
1673 / 007011 DF11.. / FDF2x1-9 Techn. description, commissioning etc.
1787 Wireless fire detection system DCW.../DOW...
Techn. description, commissioning etc.
006516 Designation strip templates for display and operating devices
007227 FDUD292 detector exchanger and tester operation
007798 NK822x Ethernet Port Installation, Function&Configuration, Commiss. etc.
008254 FDL241-9, FDLU291 ; Linear smoke detector, adjustment tester
008725 Planning for EP7F
008727 Compact control panel CI1145 EP7F
009718 FDUD293 Intelligent detector tester operation
009853 Commissioning EN12094-1 compliant single-area extinguishing system
About this document
Qualification
They have had the training appropriate to his/her
function and to the products, devices and systems
to be commissioned and have attended the tech-
nical training courses for commissioning person-
nel.
5
008726_e_en_--
06.2017