Table of Contents
Advertisement
5 Interfaces
5.2.2
Protocol printer T2240/9 (DR 2030)
Name
Protocol printer
DRT2240/9
RS232/TTY interface
Colour ribbon for T2240/9
TTY/ V.24 converter
RS 232 isolator
Table 12: Protocol printer T2240/9
When connecting the printer > 30 m, the following is required:
2 x 25-pin SUB-D connectors with housing and a 9-pin SUB-D socket with housing when
connecting the printer to SIGMANET Operating Panel S24230-F130-A4.
Cable LIYCY 8 x 1 x 0.14.
When connecting the printer < 30 m, the following is required:
1 x 25-pin SUB-D connector with housing and a 9-pin SUB-D socket with housing when con-
necting the printer to SIGMANET Operating Panel S24230-F130-A4.
Cable LIYCY 8 x 1 x 0.14
5.2.3
Thermal printer FD60
Please note for SIGMASYS M control and indicating panels:
The FD60 printer can only be operated at the SIGMASYS M control and indicating panel via
interface1. Connection to interface 2 is not possible
Name
Thermal printer FD60
24V/24V 50W transformer
Angle bracket forDC/DC
transformer
Connector line
Table 13: Thermal printer FD60
The following is needed instead of connector line V24265-K131-A1:
1 x 9-pin SUB-D connector with housing and cable LIYCY 8 x 1 x 0.14. When connecting the
printer to SIGMANET Operating Panel S24230-F130-A4, you will need a 9-pin SUB-D socket
with housing.
26 / 128
Order number
6GF6520-1LL
6GF6520-2LA
6GF6520-5LA
V24230-72-A1
WIS: 88001
Order number
V24213-Z407-A1
ETN: SVB 24 SC 24
C24230-A13-C53
V24265-K131-A1
Remark
Replaces DR2030, no
interface
Interface for T2240/9
(DR2030)
Colour ribbon for T2240/9
(DR 2030)
For protocol printer DR
2030 for connection to
SIGMASYS V.24 >30 m
Not needed when S24230-
C500-A7/C600-A10 and
V24230 Z7-A1 are used
Remark
Required by thermal
printer FD60 for power
supply
For option slot installation
120 cm (open end)
BMT Project Planning Guidelines
Best.Nr. A24205-A337-B970 – Edition 12 (03/07)
<30 m
up to 300 m
X
X
X
X
X
X
X
<30 m
>30 m
X
X
X
X
- Quick Links:
- Introduction
Hide quick links:
Advertisement
Table of Contents
