Training Courses; Notational Conventions - Siemens SIGMASYS C Manual

1 Introduction
SBT FSP DE
1.2.3

Training courses

The personnel responsible for installing and commissioning the systems will receive all the in-
formation they need in special training courses.
These training courses are offered in the SBT DE Training Center.
You will find information on training courses on the Siemens Intranet under the following ad-
dress:
https://intranet.sbt.siemens.de/page.asp?nid=622
1.3

Notational conventions

Convention/symbol
1. Operating step
•
List
Important information
http://www.siemens.de
Note
Warning
See section XY
4 / 128
http://sgs.siemens.de/asp/FSP-Intranet/index.asp
Explanation
Operating instructions are indicated by numbers.
Lists are indicated by a bullet.
Important information is displayed in bold.
Text which you must enter yourself, (e. g. Internet addresses), is formatted in
the font 'Courier New'.
Notes or recommendations are indicated by this symbol and shown on a col-
ored background.
Information which you absolutely must read is indicated by this symbol and
shown on a colored background.
Section references and links are indicated by this symbol and shown on a col-
ored background.
BMT Project Planning Guidelines
Best.Nr. A24205-A337-B970 – Edition 12 (03/07)