Page 15
Figure 2-1 Table 2-1 see Figure Table 2-2 see Figure 2-3 Table 2-3 The power behind competitiveness Delta UPS - Ultron Family (Figure 2-1: Pallet A, UPS System Cabinet & Box 1)
Page 16
Communication Interfaces Communication Interfaces...
Page 17
(Figure 2-2: Pallet B, Power Modules, Box 2, Box 3 & Box 4) 5.4.3 Internal Wiring between the UPS System Cabinet and Power Modules 5.4.3 Internal Wiring between the UPS System Cabinet and Power Modules 5.4.3 Internal Wiring between the UPS System Cabinet and Power Modules...
(Figure 2-3: Pallet C, Power Module & Box 5) 5.4.3 Internal Wiring between the UPS System Cabinet and Power Modules Figure 2-4 Table 2-4 Figure 2-5 Table 2-5 Figure 2-6 Table 2-6.
Page 19
The power behind competitiveness Delta UPS - Ultron Family (Figure 2-4: Pallet D, UPS System Cabinet & Box I)
Page 20
Communication Interfaces Communication Interfaces (Figure 2-5: Pallet E, Power Modules, Box II, Box III & Box IV)
Page 21
5.4.3 Internal Wiring between the UPS System Cabinet and Power Modules 5.4.3 Internal Wiring between the UPS System Cabinet and Power Modules 5.4.3 Internal Wiring between the UPS System Cabinet and Power Modules (Figure 2-3: Pallet F, Power Modules & Box V & Box VI) 5.4.3 Internal Wiring between the UPS System Cabinet and Power Modules...
Page 22
5.4.3 Internal Wiring between the UPS System Cabinet and Power Modules...
Page 25
Figure 2-6 7. LCD Display & Settings 2.8 Tri-color LED Indicator & Buzzer (Figure 2-8: Front View of the UPS System Cabinet)
Page 26
Figure 2-9 (Figure 2-9: How to Open the UPS System Cabinet’s Two Front Doors) 5.3 Fixing the UPS Figure 2-10...
Page 27
(Figure 2-10: Internal View of the UPS System Cabinet with Two Front Doors Open) Figure 2-10 Figure 2-11 5.4 Wiring...
Page 29
(Figure 2-11: Wiring Terminals inside the UPS System Cabinet) Figure 2-12 (Figure 2-12: Rear View of the UPS System Cabinet)
Page 30
Figure 2-13 Figure 2-13 5.3 Fixing the UPS...
Page 31
(Figure 2-13: Front View of the Power Modules) 2.6.2 Internal View...
Page 32
(Figure 2-14: Location of the Power Modules’ Front Panels & Screws) Figure 2-15 Figure 2-16 5.4 Wiring (Figure 2-15: Location of the Power Modules’ Wiring Terminals)
Page 33
(Figure 2-16: Power Module's Wiring Terminals) Figure 2-17...
Page 34
(Figure 2-17: Rear View of the Power Modules) Figure 2-18...
Page 81
7.2 How to Turn on the LCD 7.3 ON/ OFF Button (Figure 4-23: External Battery Temperature Detection Dry Contacts) 8. Optional Accessories (Figure 4-24: Output/ Input Dry Contacts)
Figure 5-4 Figure 5-5 Figure 5-4 ~ Figure 5-6 (Figure 5-4: Remove the Four M4 Screws & Loosen the Four M8 Hexagon Socket Screws of the Four Fasteners Located on the Top of the UPS System Cabinet) Figure 5-5 (Figure 5-5: Remove the Four M8 Hexagon Socket Screws Located on the Top of the Power Modules)
Figure 5-6 (Figure 5-6: Turn the Four Fasteners and Use the Four Fasteners to Join the Top of the UPS System Cabinet and the Top of the Power Modules Together) Figure 5-7 ~ Figure 5-9...
Page 98
(Figure 5-8: Balance Support Installation Method for the UPS System Cabinet) Figure 5-9 (Figure 5-9: Balance Support Installation Method for the Power Module)
Page 99
(Figure 5-10: Location of the UPS System Cabinet's Internal Panels) Figure 5-11 (Figure 5-11: Internal Mechanisms of the UPS System Cabinet)
Page 100
Figure 5-12 (Figure 5-12: Location of the Power Modules’ Front Panels & Screws) Figure 5-13...
Page 101
Figure 5-13 (Figure 5-13: Connect the Provided D-SUB15 Communication Cables to the CNPF507 Port and CNPF506 Port Located at the UPS System Cabinet’s PF5 Power Board) 5.4.1 Pre-Wiring Warnings 5.4.3 Internal Wiring between the UPS System Cabinet and the Power Modules Connection Warnings 5.4 Wiring...
Page 103
(Figure 5-14: Install the Rodent Shields at the Front Bottom of the UPS System Cabinet and the Power Modules)
Page 104
Figure 5-15 Figure 5-15 (Figure 5-15: Install the Rodent Shields at the Rear Bottom of the UPS System Cabinet and the Power Modules)
Page 105
Figure 5-16 Figure 5-16 (Figure 5-16: Face the Rear of the Power Modules & Install the Rodent Shield G at the Right Bottom Side) Figure 5-17 (Figure 5-17: Face the Front of the Power Modules & Install the Rodent Shield G at the Right Bottom Side)
Page 106
(Figure 5-18: Front View after Rodent Shields Installation)
Page 111
Figure 5-19 (Figure 5-19: UPS System Cabinet’s Front View with Two Front Doors Open)
Page 112
Figure 5-20 (Figure 5-20: Location of the Three Copper Bars & M12 Screws) Figure 5-21 (Figure 5-21: Firmly Fix the M12 Screws)
Page 113
(Figure 5-22: Location of the UPS System Cabinet's Internal Panels)
Page 114
Figure 5-23 (Figure 5-23: Internal Mechanisms of the UPS System Cabinet) Figure 5-24 (Figure 5-24: Removal of Every Power Module’s Front Panel)
Page 115
Figure 5-25 (Figure 5-25: Five Boxes’ Location)
Page 121
5.4 Wiring 5.4.3 Internal Wiring between the UPS System Cabinet and the Power Modules Figure 5-29 (Figure 5-29: UPS System Cabinet’s Front View with Two Front Doors Open)
Page 129
Figure 5-30: Wiring Terminals of the UPS System Cabinet Table 5-6: Wiring between the UPS System Cabinet and the External Maintenance Bypass Cabinet Table 5-7: External Maintenance Bypass Cabinet Wiring Information Figure 5-31: Single Unit Single Input Wiring Diagram Figure 5-34: Parallel Units Single Input Wiring Diagram 5.5 External Battery Cabinet Connection Warnings (Figure 5-34: Parallel Units Single Input Wiring Diagram) Figure 4-9...
Page 130
(Figure 5-35: Parallel Ports Connection among the Parallel UPSs) Figure 5-35 Figure 5-36 Figure 5-37 (Figure 5-36: Top Entry_ Parallel Cables Routing)
Page 131
(Figure 5-37: Top Entry & Location of Parallel Cables, Top Cover, Cable Tray and Parallel Ports) Figure 5-35 Figure 5-38 Figure 5-39 (Figure 5-38: Bottom Entry_ Parallel Cables Routing)
Page 137
Table 5-8 Figure 2-5: Wiring Terminals inside the UPS System Cabinet 5.4.4 Single Unit Wiring Table 5-6: Wiring between the UPS System Cabinet and the External Maintenance Bypass Cabinet Figure 5-31: Single Unit Single Input Wiring Diagram Figure 5-33: Single Unit Dual Input Wiring Diagram Table 5-8: External Battery Cabinet’s Protective Device (Default Battery Q’ty: 12Vdc ×...
Page 138
Figure 5-32: Grounding Diagram_ Single Unit Figure 5-40: Grounding Diagram_ Parallel Units Table 5-8 Figure 5-43 ~ Figure 5-44 Table 5-8 Table 5-8 Ferraz Shawmut Table 5-8...
Page 139
(Figure 5-43: Installation of a 2-Pole DC Circuit Breaker or DC Isolated Switch Connected in Series with a DC Fuse) (Figure 5-44: Installation of a 2-Pole DC Circuit Breaker)
Page 140
3.4 Com- mon Battery (Only for Parallel UPSs Connected to the Same External Battery Cabinet(s)) 5.4.5 Parallel Units Wiring...
Page 183
7.5 Password Entry 7. LCD Display & Settings 7.2 How to Turn on the LCD ON/ OFF Button 1.2 Connection Warnings Figure 7-2...
Page 184
(Figure 7-2: The Position of Battery Start Button) Figure 7-3 Figure 7-4 Figure 7-4 (Figure 7-3: LCD Initial Screen)
Page 185
(Figure 7-4: Main Screen_ User Login) 7.2 How to Turn on the LCD 7.5 Password Entry Figure 7-5 (Figure 7-5: Main Screen_ Administrator Login & ON/ OFF Button Location)
Page 238
(Figure 9-2: Disconnect the D-SUB15 Communication Cable Located at the Rear of UPS System Cabinet’s Right Door)
Page 239
(Figure 9-3: Remove the Protection Cover Located at the Rear of the UPS System Cabinet’s Right Door) (Figure 9-4: Remove the Three Screws from the Rear of the LCD) (Figure 9-5: Pull Out the LCD from the Front of the UPS System Cabinet)
Page 240
(Figure 9-6: Dust Filters Located at the Rear of the UPS System Cabinet’s Right and Left Doors)
Page 241
Figure 9-7 (Figure 9-7: Dust Filters Located behind the UPS System Cabinet’s Two Front Rodent Shields)
Page 242
Figure 9-8 (Figure 9-8: Dust Filters Located behind the Power Module’s Vent Cover and Front & Right Rodent Shields)