Panasonic EB-G60 Service Manual page 70

Step 12: After configure parameter of instrument, Click "APC" and doing APC calibration.
("factory" key : Return APC value each level of the handset.)
In this Case, if you use CMU200, please see Annex notes3-1 to Configure.
If you use HP8960 ,please see Annex notes3-2 to Configure°G
Step 13: You can click each number button to each level to transmit power, and you must reference right table
to each level of power. If parameter is good, press "Next" to continue.
Our Operation Level 5 and Level 6 to examples(HP8960)
In Level 5, I must adjust to decrease, it's strong.
In Level 6, I must adjust to increase, it's young.
Lv 5 Not Match
– 8–12 –