Panasonic EB-G60 Service Manual page 62

Note: Before doing any operation of Service Tool (except reflash, reflexing), you need
to turn on your handset first. If you have SIM card inserted, it is suggested that to wait
until the Network searching complete and then start your operation. If the Network
searching takes a long time to finish, the hand-set may enter sleep mode and will not
be able to get the command from PC, please press any key to wake up the handset.
3. All the data that have been read from MS will be saved automatically as a file in the assigned folder.
2). Write
1. Select the area you want to write from the "Tree view".
If "All" is clicked, it means all of the items on the tree will be selected automatically for writing purpose.
Otherwise you can select the specific items individually.
2. Make sure your handset is correctly connected with your pc, switch on your handset and click the button
"Write Data". It will automatically enter Factory Test Mode.
3. Restart the MS to make sure userdata has been written back on.
Wait for "Reading Data finish" shown on the log list.
At the mean time, you can see the status of process on progress bar.
Wait for the message "Writing Data finish" shown on the log list.
At the mean time, you can see the status of process on progress bar.
– 8–4 –