List Of Necessary Materials/Tools; Figures And Tables Figure 1.1 Fusion-Tec Model Nomenclature - Bard FUSION-TEC HR58APA Installation Support Materials

LIST OF NECESSARY MATERIALS/TOOLS

Additional hardware and miscellaneous supplies are needed for installation. These items are field supplied and must
be sourced before installation. This list also includes tools needed for installation.
List of Materials/Tools
• Personal protective equipment/safety devices
• SGR-5W Supply Grille and RGR-5W Return Grille
• Field-fabricated sleeves (if necessary)
• Bottom mounting bracket #113-140 (optional)
• Fasteners sufficient for mounting the units such as
5/16" diameter anchor/lag bolts
• 7/8" diameter washers
• Commercial grade outdoor silicone sealant
• Miscellaneous hand and power tools and jobsite or
shop materials
• Lifting equipment with the necessary capacity and
rigging to safely move/install the systems
UNIT SERIES
MAXIMUM SENSIBLE CAPACITY
58 – 5 Ton 2 Stage Step Capacity
CONTROL LOGIC AND CLIMATE OPTIONS
4 – Condenser Section Component Coating, AeroMarine Coated Evaporator Coil and Condenser Coil
5 – Internal and External Cabinet Component Coating, AeroMarine Coated Evaporator Coil and Condenser Coil
X – Standard accessories including airflow sensor, dirty filter sensor, pressure transducers, crankcase heater
Page 8 of 53
FIGURE 1.1
FUSION-TEC Wall-Mount Unit Model Nomenclature
HR 58 A P
REVISION
A – Revision Level
P – Programmable Logic Board
VOLTS & PHASE
A – 230/208/60/1
B – 230/208/60/3
ELECTRIC HEAT
0Z – O kW with Circuit Breaker
05 – 5 kW with Circuit Breaker
MZ – O kW with Circuit Breaker and Inverter
M5 – 5 kW with Circuit Breaker and Inverter
E – Factory-Installed Economizer (All Units)
P – MERV8 Disposable Pleated Filter
4 – Buckeye Gray Baked Enamel Finish
X – Copper/Aluminum Evaporator Coil, Copper/Aluminum Condenser Coil
1 – Copper/Aluminum Evaporator Coil, AeroMarine Coated Condenser Coil
3 – AeroMarine Coated Evaporator Coil, AeroMarine Coated Condenser Coil
S – All standard accessories plus additional security features and security cage
• Water to prime drain traps
• Electrical supplies
- Various size circuit breakers for the shelter AC
breaker box (see Table 1.3 on page 16)
- High-voltage wire of various gauges
(see Table 1.3)
- Communication wire: 2-wire, 18 gauge,
shielded with drain
- Miscellaneous electrical supplies including
rigid/flexible conduit and fittings, junction
boxes, wire connectors and supports
A 0Z E P
VENT PACKAGE
FILTER
COLOR AND CABINET FINISH
X – Beige Baked Enamel Finish
1 – White Baked Enamel Finish
5 – Desert Brown Baked Enamel Finish
8 – Dark Bronze Baked Enamel Finish
PLACEHOLDER
X – Future Use
COIL AND UNIT COATING OPTIONS
ACCESSORIES AND CONTROLS OPTIONS
X X X
X