Using The Tec-Eye Tm; Tec-Eye Tm Hand-Held Diagnostic Tool; Figure 2.1 Tec-Eye Tm Display And Interface; Figure 2.2 Tec-Eye Tm Connection To Unit Control - Bard FUSION-TEC HR58APA Installation Support Materials

USING THE TEC-EYE
TEC-EYE
ALARM KEY
MENU KEY
ESCAPE KEY
ALARM KEY
Allows viewing of active alarms
Silences audible alarms
Resets active alarms
MENU KEY
Allows entry to Main Menu
ESCAPE KEY
Returns to previous menu level
Cancels a changed entry
TEC-EYE Hand-Held Diagnostic Tool
TM
The microprocessor control used in the FUSION-TEC
wall-mount air conditioners allows for complete control
and monitoring through the use of the provided TEC-
EYE hand-held monitor. This comprehensive service
TM
tool utilizes the latest in state-of-the-art technology
including a large, easy-to-read backlit LCD graphic
display.
The menu driven interface provides users the ability
to scroll through two menu levels: Quick Menu and
Main Menu. The menus permit the user to easily view,
control and configure the unit.
The controller is completely programmed at the factory;
the default setpoints and their ranges are easily viewed
and adjusted from the TEC-EYE
and operating parameters are permanently stored
on FLASH-MEMORY in case of power failure. The
controller is designed to manage temperature levels to
a user-defined setpoint via control output signals to the
wall mount air conditioning system.
The TEC-EYE connects to the wall-mount unit control
TM
board via an RJ11 modular phone connector as shown
in Figure 2.2.
Page 26 of 53
TM
FIGURE 2.1
(Bard P/N 8301-059) Display and Interface (Status Screen Shown)
TM
display. The program
TM
UP KEY
Steps to next screen in the display menu
Changes (increases) the value of a modifiable field
ENTER KEY
Accepts current value of a modifiable field
Advances cursor
DOWN KEY
Steps back to previous screen in the display menu
Changes (decreases) the value of a modifiable field
TEC-EYE
TM
Modular Phone Connector for
TEC-EYE TM Hand-Held Diagnostic Tool
When not being used, the TEC-EYE
diagnostic tool should be stored inside or near the
LV1000 controller. Do not let the TEC-EYE
shelter.
UP KEY
ENTER KEY
DOWN KEY
FIGURE 2.2
Connection to Unit Control
hand-held
TM
leave the
TM