equipment would be directly mounted in front of
the unit. The rear deflectors must be folded out and
secured by the installer with the supplied screws
(see Figure 1.21).
FIGURE 1.21
Fold-Out Diverter
Rear deflectors as shipped
Rear deflectors raised and secured together
2. The grille is also equipped with downward curved
diverter blades to ensure a smooth and efficient
means of directing the air pattern in a downward
pattern, and away from being drawn back into
the return air opening. The curved diverter blades
are shipped in the flat position and need to be
folded out to between 75-90° (best tuned to each
individual structure). See Figures 1.22 and 1.23.
FIGURE 1.22
Downward Curved Diverter Blades
Diverter blades as shipped (left), and after raising (right)
FIGURE 1.23
View of Installed Grille (as seen from above)
Completing the Installation
At this stage, the installation process of the wall-mount
unit is finished. To complete the Bard Free Cooling
System installation, refer to the LV1000 controller
manual 2100-673.
Page
23 of 53