Table of Contents
Advertisement
REMOTE CONTROL FUNCTIONS
CHANNELS
If the user selects Channels in the Settings menu, an existing channel name will appear or the "Lighting" channel will
created by default. A maximum of 128 channels is available.
Settings
Time
Timers
Channels
Menu lists
Shortcut keys
Display
2.00
l
NOTE: For bidirectional receivers a message is displayed, while standard receivers require users to check the
correct programming on the receiver. A * before the channel name means that a default name, and not a specific
name, is still assigned to a receiver. A
has not yet been configured.
The following settings can be programmed for each channel:
Channels
Lighting
+
l
PEHA_M_450FU_HS128 (Rev02-26.07.17)
l
Programme channels
Channels
Create a new channel: .................................................................
Lighting
Confirm and back (to Settings): ...................................................
Select existing channel (channel 01 - 128): ................................. ,
Activate setting: ........................................................................... l
+
Send radio signal to the receiver: ................................................
(assign channel to receiver)
DEFINITION OF CHANNEL: A channel describes the basic functionality or connection to
a receiver or user function. The channel will then only be linked in all additional functions
in the handheld transmitter. Deleting a channel will remove all the connections and links.
before the channel name denotes: bidirectional connection, the receiver
l
Set channel
CHANNEL NAME: Use the cursor buttons to select the characters to enter a name (e.g.
ceiling light). Then use the Enter I button to confirm the characters you have selected.
Use the
Menu button
FUNCTION: Confirm using the Enter I button. First, an address is entered between 1
and 128. To do this, use the
the first free address. Use the Menu button
the cursor buttons to select the function:
2
0
Standard switches with the choice of icons (see below)
1
User function (appears only if it has been created)
2
Bidi switch receivers
3
Bidi dimmers
4
Bidi roller shutters
5
Bidi heating visualisation
6
Bidi window visualisation
DELETE CHANNEL: Use this command to delete the channel. Press the Enter I button
to prompt the message "Really delete xx channel? All connections will be removed".
Hold down the Menu button
Press the Menu button
Select menu item
,
Back
button to save and return to the menu and function selection. Press the
to discard the entries and return to the menu.
,
cursor buttons. The system will automatically propose
to delete the channel and all the connections.
to return to the menu.
to delete the address. You can also use
+
D - 11
Advertisement
Table of Contents
