Table of Contents
Advertisement
REMOTE CONTROL FUNCTIONS
GROUP LISTS
Settings
Time
Timers
Channels
Group lists
Shortcut keys
Display
2.00
l
The following settings can be programmed for each group list:
List 01
List name
Add channels
Move channels
Delete channels
Delete list
l
PEHA_M_450FU_HS128 (Rev02-26.07.17)
Programme group list
l
Group lists
Create new group list: .................................................................
List 01
Confirm and back (to Settings): ...................................................
List 02
List 03
Select group list: .......................................................................... ,
Activate setting: ...........................................................................
+
NOTE: In group lists, channels with switch functions will be created as a group. This is
practical for rooms (e.g. living room, kitchen, bathroom, etc.) or functions (e.g. panic
button, central switching off, etc.).
If "Group lists" is selected in the Settings menu, existing group lists are displayed that
can be edited.
Set group list
l
LIST NAME: List names are automatically created (List 01, List 02, etc.). A personalised
name can be assigned here. To do so, select the characters to enter a name using the
cursor buttons. Then use the Enter I button to confirm the characters you have selected.
A maximum of 17 characters is permitted. Use the
Group list. The name then appears on the top line.
ADDING CHANNELS: Confirm using the Enter I button. A list of all the existing channels
now appears. Use the cursor buttons to select the channels to be added, and confirm
them with the Enter I button. A triangle then appears to the left of the accepted channels.
This enables users to quickly see which channels have been accepted. Select a previously
selected channel and press the Enter I button to remove the channel from the list again,
and the triangle disappears. The number of accepted channels appears in the centre of
the lower part of the display. Use the Menu button
for this list will be displayed again.
MOVE CHANNELS: Confirm with the Enter I button. A list of all the existing channels
now appears. Use the cursor buttons to select the channel you wish to move. This then
appears with a triangle to the left. Use the
selected channel to the required position. Use the left Menu button
setting, and the menu for this list will be displayed again.
DELETE CHANNELS: Confirm with the Enter I button. A list of all the existing channels
now appears. You can then use the cursor buttons to select the channel you wish to delete.
Confirm using the Enter I button. A triangle will then appear to the left. Use the Menu
button
DELETE LIST: Use this order to delete a group list. Press the Enter I button and the "Really
delete xx list?" prompt appears. If the Menu button
deleted. If the Menu button
changes applied.
Select menu item
,
Back
–
to delete the channel, and the menu for this list will be displayed again.
is pressed, the user will return to the menu with no
button to save and return to the
+
to accept this list, and the menu
,
Menu buttons to now move the
to accept this
is pressed, the list is then
+
l
D - 13
Advertisement
Table of Contents
