Table of Contents
Advertisement
SERVICE TOOL
RADIOLINKTEST
The EnOcean RadioLinkTest is a range test of a radio signal between two handheld transmitters or between a bidirectional
receiver and a handheld transmitter. The handheld transmitter analysing the signal must be configured as the master
and the second device as a slave. Bidirectional receivers are always configured as slaves.
The start and connection setup of the range test between two handheld transmitters is initiated with the
the master and slave. The master carries out the range test analysis.
Settings
Login
Language
Histogram
EnOcean service
Remote management
Factory settings
2.00
l
RadioLinkTest
Master
RLT running
17%
l
D - 20
RadioLinkTest
l
EnOcean monitor
ID_
O
R1
R2
~
Monitor
Press button 2x
Start range test: ...................................
Select master, slave: ............................
Select EnOcean service: ...................... ,
RadioLinkTest (RLT result)
RadioLinkTest
10:15:14 28.08.2013
ID 0100440B
O
R1
R2
Radio signal
Time + date
Handheld transmitter (transmitter ID)
Field strength (O, R1, R2)
Radio signal: O = transmitter (original telegram) ; R1 = 1-level repeater ; R2 = 2-level repeater
Back (to RadioLinkTest): .............................
Select display (see above): .........................
End the range test and back (to RadioLinkTest)
RadioLinkTest
Range test
Button : Back (to Settings)
,
RadioLinkTest
ID
0100440B
Lev: -43dBm
Sub: 3
Qual: 99%
O
Quality
Handheld transmitter (transmitter ID)
Lev: RSSI level
Sub: Sub-telegrams
,
Master
~
PEHA_M_450FU_HS128 (Rev02-26.07.17)
button on
Advertisement
Table of Contents
