Ani 0016 A Annunciator Module; Bcm-0000-B Battery Controller Module - Bosch FPA-5000 Product Information

36 en | Product Description
1.15.1

ANI 0016 A Annunciator Module

The annunciator module has 16 red and 16 yellow LEDs for displaying the operating states of
16 definable detector points.
The activation of each LED is specified using the FSP-5000-RPS Programming Software.
This defines which detection points will activate the LEDs in which state.
Technical specifications
Display elements
Input voltage
Maximum current consumption
- Standby mode (all LEDs off)
- In the event of an alarm (all
LEDs on)
Dimensions (H x W x D)
Weight
1.15.2

BCM-0000-B Battery Controller Module

The module monitors the power supply for the complete panel and regulates battery charging
as a function of time and temperature. The button has three functions, which are dependent
on the status of the battery controller module:
–
–
–
F.01U.028.089 | 5.4 | 2009.08
The four LEDs on the module light up as a confirmation and LED test each time the
button is pressed.
If the batteries have a voltage of between 18 V and 21 V, the battery charging procedure
can be started manually. Please note that a power supply must be available.
The 24 V switch outputs can be reset. The switch output is deactivated if a fault occurs.
Product Information
16 red LEDs, 16 yellow LEDs
20 V DC to 30 V DC / 5 V DC ± 5%
6 mA
26 mA
Approx. 127 x 96 x 60 mm (5.0 x 3.8 x 2.4 inches)
Approx. 206 g (approx. 7.3 ounces)
Modular Fire Panel
Bosch Sicherheitssysteme GmbH