Adding A Person On Hold To A Conference Call; Putting A Conference Call On Hold And Resuming A Call; Dropping Or Disconnecting The Last Participant From A Conference Call - Avaya J139 User Manual

Call related features
3. When the third participant answers the call, press the Join soft key.
4. To add another person, press Add and repeat Steps 2 and 3.

Adding a person on hold to a conference call

About this task
You can add a held call to a conference call.
Procedure
1. On the Phone screen, select your active call.
2. Press Conf or Add button if you are already in a conference.
3. Press Held call soft key to see a list of held calls.
4. Select the call on hold that you want to add to the conference.
5. Press one of the following:
• Join
• Conf
The held call is added to the conference call.

Putting a conference call on hold and resuming a call

About this task
Use this procedure to put a conference participant on hold, while other participants continue the
conference call.
Procedure
1. Press Hold soft key during a conference call.
2. Do one of the following:
• Press Resume.
• Select the call appearance to resume the conference call.
Dropping or Disconnecting the last participant from a conference
call
About this task
You can use this procedure to disconnect the last participant who joined the conference. You
cannot disconnect other participants after you disconnect the last participant. You can use this
method to disconnect a participant again after you add another participant.
October 2019 Using Avaya J139 IP Phone SIP
Comments on this document? infodev@avaya.com
42