Making A Call Using Uri Dialing; Multicast Paging - Avaya J139 User Manual

Advanced features

Making a call using URI dialing

Before you begin
• Ensure that you have the URI of the extension number.
• Ensure that the Edit dialing feature is enabled in your phone.
Procedure
1. Enter the number that you want to call.
Press the ABC, abc, or 123 softkey to change between the input methods.
Note:
Press the Bksp softkey to delete the characters you have entered.
2. Enter the complete URI that you want to call.
3. Press the Call softkey to make the call.

Multicast Paging

With the Multicast Paging feature, you can receive a page that will be automatically played on the
phone. If configured by the system administrator, you can send a multicast page to a group of
phones in the network.
An incoming multicast page is played on the phone speaker. When the page is played, the Phone
screen displays the Page from <group name> notification during the whole time of
transmission.
All configured multicast groups that you can send a page to are available in the Features menu.
You can add, move or delete the multicast page keys from the Phone screen by the common
customization procedure.
Active calls with a lower priority than the multicast page are put on hold, all lower-priority incoming
calls are ignored.
A multicast page is ignored if the agent is on an active call and has the Do Not Disturb status, or
making an emergency call.
Sending a multicast page
About this task
You can send a multicast page to a group of users by activating the Multicast Paging group on the
Phone screen. If the required group is not added on this screen, you can access all multicast page
groups configured for your phone in the Features menu.
October 2019 Using Avaya J139 IP Phone SIP
Comments on this document? infodev@avaya.com
58