Dropping Or Disconnecting The Last Participant From A Conference Call; Viewing The Details Of A Conference - Avaya J169 User Manual

Dropping or Disconnecting the last participant from a conference
call
About this task
You can use this procedure to disconnect the last participant who joined the conference. You
cannot disconnect other participants after you disconnect the last participant. You can use this
method to disconnect a participant again after you add another participant.
Procedure
1. From the phone screen, select your active conference call.
You will see the More soft key.
2. Press More > Drop when the conference is active.
Result
The participant who was added last gets disconnected from the conference.
Related links
Adding a participant to no hold conference

Viewing the details of a conference

About this task
Use this procedure to view the details of the participants on a conference call.
If you cannot, it might be due to the server on which your extension is configured. Contact your
system administrator.
Procedure
1. On the Phone screen, select your active call.
2. Press Conf soft key.
3. Do one of the following:
• Dial the telephone number.
• Call the person from the Contacts list.
• Call the person from the Recents list.
4. When the person answers, press Join or OK to add the person to the existing call.
5. Press Add and repeat the steps to add another person to the conference.
6. Press the Details button to access the details of the participants.
October 2019
on page 69
Using Avaya J169/J179 IP Phone SIP
Comments on this document? infodev@avaya.com
Managing conference calls
45