Client - Siemens SIMATIC NET SCALANCE W780 Series Configuration Manual

Configuring with Web Based Management
6.6 "Interfaces" menu
Or
1. Disable the "Use selected data rates only" option in Table 1.
2. Click the "Set Values" button.
6.6.2.10

Client

Connecting to a network
On this WBM page, you can specify how the device connects to a network as client.
Note
This WBM page is only available in client mode.
Note
WLAN interface disabled
The WLAN interface will be disabled unless at least one SSID is configured or the setting
"Any SSID" is enabled.
298
SCALANCE W780/W740 to IEEE 802.11n Web Based Management
Configuration Manual, 08/2018, C79000-G8976-C267-13