Port-Based Vlan - Siemens SIMATIC NET SCALANCE W780 Series Configuration Manual

6.7.1.2

Port-based VLAN

Processing received frames
On this page, you specify the configuration of the port properties for receiving frames.
Requirement:
● On the "General" page, "802.1Q VLAN Bridge" is set for "Base Bridge Mode".
Description
Table 1 has the following columns:
Note
Table 1 is only available if at least one VLAN is configured.
● Port
Shows that the settings are valid for all ports of table 2.
● Priority / Port VID / Acceptable Frames / Ingress Filtering
In the drop-down list, select the setting for all ports. If "No Change" is selected, the entries
of the corresponding column in Table 2 remain unchanged.
● Copy to Table
If you click the button, the setting is adopted for all ports of table 2.
SCALANCE W780/W740 to IEEE 802.11n Web Based Management
Configuration Manual, 08/2018, C79000-G8976-C267-13
Configuring with Web Based Management
6.7 "Layer 2" menu
331