Siemens SIMATIC NET SCALANCE W780 Series Configuration Manual page 322

Configuring with Web Based Management
6.6 "Interfaces" menu
● Color Scheme
With this icon, you change the color scheme for the graphic type "Spectrogram":
– The color goes from the lowest value (-100 dBm) in black to the highest value (0 dBm)
– The color goes from the lowest value (-100 dBm) in red to the highest value (0 dBm) in
● Reset
With this icon you reset the maximum and average values of the graphic type "Realtime".
This table contains the following columns:
● Radio
Shows the WLAN interface to which the information applies.
● State
Shows the status of the measurement. The following values are possible:
– stopped
– running
● Frequency Band
Specify the frequency band.
● Center Frequency
Select the center frequency.
● Start
Click the button in this column to start the measurement.
● Stop
Click the button in this column to end the measurement.
Procedure
1. Select the required frequency band from the "Frequency Band" drop-down list.
2. Select the required center frequency from the "Center Frequency" drop-down list.
3. Click the "Start" button.
4. To stop the measurement, click the "Stop" button.
5. You can adapt the settings in the second table during the measurement.
322
in red.
black.
The measurement was stopped.
The measurement is running.
SCALANCE W780/W740 to IEEE 802.11n Web Based Management
Configuration Manual, 08/2018, C79000-G8976-C267-13