Radio Settings - Siemens SIMATIC NET SCALANCE W780 Series Configuration Manual

Industrial wireless lan scalance w780/w740 to ieee 802.11n web based management
Hide thumbs Also See for SIMATIC NET SCALANCE W780 Series:
Table of Contents

Advertisement

● Antenna Gain [dBi]
If you select the "User defined" entry for the "Antenna Type", enter the antenna gain
manually in the "dBi" unit.
– Antenna Gain 2.4 GHz [dBi]
– Antenna Gain 5 GHz [dBi]Enter the antenna gain the antenna has in the 5 GHz
● Cable length [m]
Enter the length of the flexible antenna connecting cable in meters between the device
and the external antenna.
● Additional Attenuation [dB]
Here, specify the additional attenuation caused, for example, by an additional splitter.
Note
If you use other WLAN interfaces, make sure that you have adequate channel spacing.
6.3.1.6

Radio Settings

Introduction
On this Basic Wizard page, you specify the configuration for the WLAN interfaces.
Description
This table contains the following columns:
● Radio
Shows the available WLAN interfaces.
● Enabled
Enable or disable the WLAN interface. The WLAN interfaces are disabled when the
device is supplied.
SCALANCE W780/W740 to IEEE 802.11n Web Based Management
Configuration Manual, 08/2018, C79000-G8976-C267-13
Enter the antenna gain the antenna has in the 2.4 GHz frequency band.
frequency band.
Configuring with Web Based Management
6.3 "Wizard" menu
101

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents