Roland VersaUV LEF2-200 Regular Maintenance Manual page 45

When the display returns to the following screen, manual cleaning is finished.
SETUP MEDIA
R E L AT E D I T EM
P. 27 "Head Refreshing Method"
"
2.
Perform a printing test to check the results.
Procedure
Load the object to be printed on.
A
Set the print area.
B
Press [FUNCTION].
C
Display the printing test menu.
D
TEST PRINT
Press [ ] several times to display the screen shown below.
It is difficult to check the white ink if the paper for use in the printing test is white. We recom-
mend printing on transparent paper.
CLEANING
TEST PRINT
TEST PRINT 2
Press [ ] several times to display the screen shown below.
Because white ink is printed on a black undercoat, white ink can be easily checked even when
printed on white paper. However, printing takes longer than "TEST PRINT."
CLEANING
TEST PRINT2
Press [ENTER].
E
Printing of the test pattern starts.
Check whether there is dot drop-out or dot displacement in the test pattern.
F
Missing blocks indicate dot drop-out. Collapsed or inclined blocks indicate dot displacement.
The following figure shows the "TEST PRINT 2" test pattern.
Manual Cleaning
2.Regular Maintenance
43