Roland VersaUV LEF2-200 Regular Maintenance Manual page 33

Open the sheet retaining cover and remove the head cleaning sheet.
R
Remove the sheet by pinching parts that are clean of ink and cleaning liquid.
Check that there are traces of ink being wiped off onto the head cleaning sheet.
S
I M P O R TA N T
Quickly dispose of used head cleaning sheets.
Leaving a used head cleaning sheet inside the machine may lead to the machine's painting peeling
off.
For information about purchasing head cleaning sheets, contact your authorized Roland DG Corpo-
ration dealer or visit our website (http://rolanddg.com/).
P o i n t
• If there are no traces of ink being wiped off onto the sheet, head refreshing has failed. Check the
following points, and then perform head refreshing again.
¾ Has the head cleaning sheet been attached in the correct position?
¾ Is the head cleaning sheet loose?
¾ Has cleaning liquid soaked into the entirety of the head cleaning sheet?
¾ Has too much cleaning liquid been applied? (The appropriate amount is two drops per cleaning
pad.)
• Cleaning pads cannot be used if they are severely deformed (warped or tilted) or are coming free
of the unit. Replace the cleaning pad unit. For information on replacement, contact your authorized
Roland DG Corporation dealer.
Maintenance That Must Be Performed Daily
2.Regular Maintenance
31