Roland VersaUV LEF2-200 Regular Maintenance Manual page 30

Maintenance That Must Be Performed Daily
M E M O
Selecting "NO" returns the display to the top menu. However, the same message will be dis-
played once a certain amount of time has passed and in specific situations (such as before the
start of manual cleaning and during wiper replacement). Head refreshing is an important oper-
ation that keeps the print heads in good condition. Perform this operation with as close to the
appropriate timing as possible.
Press [ENTER].
D
Proceed to step
Press [FUNCTION].
E
Press [ ] once, and then press [ ] twice to display the screen shown below.
F
CLEANING
HEAD REFRESH
Press [ENTER].
G
When the following screen is displayed, open the front cover.
H
SET HEAD
REFRESHER
Check that nothing has been placed on top of the flat table.
I
Remove any objects to be printed on and jigs that are present.
Attach the head refresher to the left side at the front of the flat table.
J
I M P O R TA NT
Be sure to attach the head refresher in this position. Attaching it in the incorrect position may
lead to malfunctions caused by the head refresher hitting the print heads.
Remove the head refresher cover.
K
2.Regular Maintenance
28
H .