Roland VersaUV LEF2-200 Regular Maintenance Manual page 26

Maintenance That Must Be Performed Daily
6.
Perform a printing test.
Before you carry out actual printing, perform a printing test to ensure no dot drop-out or dot dis-
placement occurs.
Procedure
Before the start of daily operations, remove just the white ink cartridge, shake it 50
A
times (about 20 seconds), and then reinsert it.
So that the ink mixes well, shake the ink cartridge horizontally with a stroke length of around 5
cm (2 in.) from each end of the ink cartridge.
IM P O R TAN T
The ingredients in white ink tend to settle. The precipitation of the ingredients in the ink disables
printing in normal color. Allowing the ink to stand without carrying out these steps can cause the
settled material to harden, resulting in malfunction or other problems.
Press [FUNCTION].
B
Display the printing test menu.
C
TEST PRINT
Press [ ] to display the screen shown below.
It is difficult to check the white ink if the paper for use in the printing test is white. We recom-
mend printing on transparent paper.
CLEANING
TEST PRINT
TEST PRINT 2
Press [ ], then [ ] to display the screen shown below.
Because white ink is printed on a black undercoat, white ink can be easily checked even when
printed on white paper. However, printing takes longer than "TEST PRINT."
CLEANING
TEST PRINT2
Press [ENTER].
D
Printing of the test pattern starts.
2.Regular Maintenance
24