Roland VersaUV LEF2-200 Regular Maintenance Manual page 40

When Normal Cleaning Is Not Effective
M E M O
The screen shown below appears, and then cleaning starts. The (approximate) remaining time
for the procedure is displayed on the screen. (The display shown below is an example. "01:45" =
"1 minute and 45 seconds")
CLEANING...
>>
When finished, the screen shown below appears again.
POWERFULL CL.
AB
Press [ ].
B
Display the printing test menu.
C
TEST PRINT
Press [ ] several times to display the screen shown below.
It is difficult to check the white ink if the paper for use in the printing test is white. We recom-
mend printing on transparent paper.
CLEANING
TEST PRINT
TEST PRINT 2
Press [ ] several times to display the screen shown below.
Because white ink is printed on a black undercoat, white ink can be easily checked even when
printed on white paper. However, printing takes longer than "TEST PRINT."
CLEANING
TEST PRINT2
Press [ENTER].
D
Perform a printing test again to check whether the dot drop-out and dot displacement have
been corrected.
P o i n t
• If the problem persists, perform normal, medium, or powerful cleaning again.
• If problems such as dot drop-out and dot displacement persist even after you have performed nor-
mal, medium, or powerful cleaning several times, perform "manual cleaning."
• This cleaning can be effective when carried out periodically, according to the frequency of use.
RE L AT E D I T EM
P. 19 "Printing Tests and Normal Cleaning"
"
P. 33 "Medium Cleaning Method"
"
P. 40 "Manual Cleaning Method"
"
2.Regular Maintenance
38
01:45