Analog Input Board Adjustments - Sony DVS-7300 System User Manual

Operations

Analog Input Board Adjustments

In a D2 system, when using an optional BKDS-7111 Analog Composite
Input board, use the following procedure to adjust the gain of the input
signal.
1
2
3
4
14-6
Chapter 14 DIAGNOSIS Menu Operations
In the DIAGNOSIS menu, select item 1 (SWER PROC) to adjust an
analog input board installed in the switcher, or select item 2 (DMK
PROC) to adjust an analog input board installed in the DMK-7000.
The PROC ADJUST menu appears.
BOARD ANALOG
CONFIG INPUT
F1 F2 F3
Function key indications in the PROC ADJUST menu
Press F4 (ANALOG INPUT).
The function key indications change as follows, and a list of input signals
and parameter settings appears.
SELECT
#2
F1 F2 F3
Press F2 (SELECT) or turn control knob 2 to align the cursor with the
input signal for which you wish to make the adjustment.
Press F4 (GAIN), then turn control knob 4 to adjust the gain.
Knob Parameter
4 Gain
ANALOG TERM
OUTPUT MODE
F4 F5 F6 F7
GAIN
F4 F5 F6 F7
Setting
Set gain (0 to 255)
F8 F9 F10
SAVE
F8 F9 F10