Setup Relating to Operations From the Control Panel
(OPERATION Menu)
3
4
13-80
Chapter 13 Setup
Press F7 (CUSTOM MODE).
The CUSTOM MODE menu appears.
Carry out the operation shown in the following table corresponding to the
desired setting.
Setting
Operation
Setting the operating
Press F1 (FLX PAD MODE).
mode for the FlexiPad
This toggles between MODE1 and MODE2.
Setting the linkage
Press F2 (FLX PAD AUTO SELECT).
between the transition
This toggles between MODE1 and MODE2.
type selection buttons
and the FlexiPad
Setting the method of
Press F3 (REF SEL MODE).
reference channel
This toggles between MODE1 and MODE2.
selection using the
numeric keypad
section
Setting the linkage
Press F4 (SS RECALL MODE).
between snapshot
This toggles between MODE1 and MODE2.
recall from the
numeric keypad
section and the
FlexiPad
Making the settings
Press F5 (XPT TALLY).
relating to the lighting
This toggles the setting between MODE1 and MODE2.
of buttons when the
same signal is
assigned to more than
one cross-point button
Setting for the
Press F6 (FLX PAD SS LASTX).
FlexiPad snapshot
This toggles between ENBL and DSBL.
recall LAST X function
Setting for the fader
Press F7 (FADER CURVE).
lever operation
This toggles between MODE1 and MODE2.
Setting for bus tally
Press F8 (BUS TALLY).
indicator operation
This toggles between TALLY and V-PROC.