Setup Relating To Interfaces With Peripheral Devices (Periph Menu) - Sony DVS-7300 System User Manual

Setup Relating to Interfaces With
Peripheral Devices (PERIPH Menu)
To carry out setup operations relating to interfaces with peripheral devices,
access the PERIPH menu.
To access the PERIPH menu
In the SETUP menu, select item 4 (PERIPH).
The PERIPH menu appears.
F1
Selecting the next menu
When you have displayed the PERIPH menu, access the next menu according
to the data item you wish to set.
The menus you can access from the PERIPH menu are listed in the following
table, together with their functions, and the function keys you need to press to
access them.
Menu
PORT ASSIGN Selecting the type of device connected to
AUX
CONTROL
DME
INTERFACE
PORT AUX DME
ASSIGN CTRL
IF
F2 F3 F4 F5
Function key indications in the PERIPH menu
Menus accessed from the PERIPH menu
Functions
an RS-422A port of the switcher
Making the following settings relating to
auxiliary bus control from an RS-422A
port of the switcher.
• Setting the control function for bus
control from an RS-422A port
• Setting the function for recalling
auxiliary bus settings when executing a
key frame or snapshot
Making the following settings relating to
interface settings for a digital multi
effects
• Making the reentry cross-point button
setting
• Setting the on-air tally function
• Making the auxiliary bus setting for
output to DMEs
• Assigning DMEs for DME wipes
ROUTER GPI GPI PANEL
INPUT OUTPUT
IF PORT
F6 F7 F8 F9
Function key
F3 (PORT
ASSIGN)
F4 (AUX
CTRL)
F5 (DME IF)
Chapter 13 Setup
F10
See page
13-49
13-50
13-51
(Continued)
13-47